How to price driveway and patio pressure washing
Include square footage, setup, water, any pre-treatment, travel, cleanup, and the walk-around you do before you pull the trigger. This page walks through each piece, then gives you a calculator to build a price from your own numbers.
Count every hour the job takes.
A manageable first job: A small concrete driveway or patio with an outdoor faucet, a clear drainage path, and nothing fragile in the spray zone.
These are the parts newcomers leave out of the price:
- Whether the surface can handle the pressure, and damage that was already there
- Hose setup, water supply, runoff, and overspray
- Machine maintenance and hauling
Add what each job uses up.
These supplies run out and need restocking, so a share of them belongs in every price:
- Pressure washer quick-connect fittings. Lets you swap hoses and wands quickly without leaks.
- Pressure washer O-ring kit. Stops drips at the joints between faucet, hose, and wand.
- Budget for the hoses, nozzles, and fittings that make the washer usable along with the machine itself.
- Treatment, water, and disposal costs firm up once you see the actual job.
- Still to research: Water access
- Still to research: Runoff handling
- Still to research: Insurance
Build a price for one job.
Price = (work hours × hourly pay + supplies + travel and fees + share of monthly costs) × (1 + profit %)
Enter your own numbers. We don’t suggest a rate, because what customers pay for driveway and patio pressure washing depends on your town and the job in front of you.
Enter a value in every field.
Use zero only when you have confirmed that the cost is truly zero.
See when the starter kit pays for itself.
The starter kit for driveway and patio pressure washing runs about $550–$1500. Divide what you spend by what one job leaves after its costs:
| Left from each job after costs | Jobs to pay back the kit |
|---|---|
| $25 | 22 to 60 jobs |
| $50 | 11 to 30 jobs |
| $100 | 6 to 15 jobs |
The table is arithmetic on the kit’s price range, not a forecast of what you will earn. The calculator below starts with the top of the range; change it to what you actually spend.
Enter a value in every field.
Use zero only when you have confirmed that the cost is truly zero.
Pricing driveway and patio pressure washing: quick answers.
How much does it cost to start driveway and patio pressure washing?
The starter kit in our guide runs about $550 to $1500, depending on what you already own and what you buy used. That range leaves out costs you need to look up yourself: Water access; Runoff handling; Insurance.
What should I include when I price driveway and patio pressure washing?
Include square footage, setup, water, any pre-treatment, travel, cleanup, and the walk-around you do before you pull the trigger. Newcomers most often leave out: Whether the surface can handle the pressure, and damage that was already there; Hose setup, water supply, runoff, and overspray; Machine maintenance and hauling.
Which supplies get used up on each job?
Pressure washer quick-connect fittings, Pressure washer O-ring kit. Count what one job uses and add it to the price, so restocking never comes out of your pay.
How many jobs does it take to pay back the starter kit?
Divide what the kit cost you by what one job leaves after its costs. With $25 left per job, a $550–$1500 kit takes 22 to 60 jobs. With $50 left per job, a $550–$1500 kit takes 11 to 30 jobs. With $100 left per job, a $550–$1500 kit takes 6 to 15 jobs. These are arithmetic examples, not typical earnings.
How do customers usually pay?
Cash is common. Same-day payment may be possible. A homeowner may pay when the job’s done, though weather, quotes, and scheduling can push back your first payday.